with dowels to interconnect them (SUPPLIED) or can be glued to the ground (ADHESIVE NOT INCLUDED)
holes and dowels only on 2 (opposite) sides (not all around the tile)
These come with free Dowels for fitting together. (adhesive also available)
These rubber tiles can be used in severe conditions due to their high durability.They retain their shape and characteristics for years without any change. Weather conditions (cold, warm, humid etc.) do not change the shape. These products are durable, lightweight and also have a high shock absorption, slip resistance to prevent injuries.
The surface of the tile prevents people's fatigue.
These tiles are lighter than other material and significantly less expensive.
50cm x 50cm x 30cm (20mm and 40mm thickness also available.)
Tested to TS EN1176-1 and TS EN 1177
Critical Fall Height: 30mm – 100cm
Resistance to abrasions
Contains UV particles for outside climate conditions
They need to be installed on top of concrete/tarmac or well laid paving slabs.
Inspect delivered rubber tilesthoroughly. Any visualdefects must be reported prior to installation.
Storetiles in clean, dry, protected from direct sunlight environment at a minimum temperature of 5°C.
Readinstallation instructions, warranty and other disclaimers before beginning any installations.
Generally accepted installation practices should be followed.
Use of trained installation professionals is recommended for best results.
Active Garden does not warrant any installation work and specifically disclaims liability for any direct or indirect personal injury, property damage or other costs or losses resulting from incorrect or inadequate installations.